Configuring The Wireless Network Settings - Belkin Wireless G Travel Router F5D7233 User Manual

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface

Configuring the Wireless Network Settings

The "Wireless" tab lets you make changes to the wireless network
settings. From this tab, you can make changes to the wireless network
name (SSID), operating channel, and encryption security settings. You
can also configure the Router to be used as an access point.
Changing the Wireless Network Name (SSID)
To identify your wireless network, a name called the SSID (Service Set
Identifier) is used. The default SSID of the Router is "Belkin Traveler".
You can change this to a name of your choice or leave it unchanged.
If there are other wireless networks operating in your area, you will
want to make sure that your SSID does not match that of another
wireless network in the area. To change the SSID, type the SSID that
you want to use in the "SSID" field
(2)
. The change will be effective immediately. If you make a change
to the SSID, your wireless-equipped computers may also need to be
reconfigured to connect to your newly named network. Refer to the
documentation of your wireless network adapter for information on
making this change.
(1)
(2)
(1)
and click "Apply Changes"
36