Belkin Wireless G Travel Router F5D7233 User Manual page 30

Using the Web-Based Advanced User Interface Using the Web-Based Advanced User Interface
Setting your Internet Service Provider (ISP) Connection Type to
Point-to-Point Tunneling Protocol (PPTP)
[European Countries Only]. Some ISPs require a connection using
PPTP protocol, a type of connection most common in European
countries. This sets up a direct connection to the ISP's system.
Type in the information provided by your ISP in the space provided.
When you have finished, click "Apply Changes"
the changes, if your Router is set up properly, the "Internet Status"
indicator will read "Connected".
(1)
(2)
(3)
(4)
(5)
(6)
(7)
1. IP Address
Provided by your ISP. Enter the IP address here.
2. Subnet Mask
Provided by your ISP. Enter your subnet mask here.
3. Default Gateway
Provided by your ISP. Enter your default gateway here.
4. User ID
Provided by your ISP. Enter your PPTP account name here.
28
(8)
. After you apply
(8)