VDO Cyclecomputing M6.1 Short Instruction Manual page 27

Setting the NAVIGATOR
SET
– Press the BIKE button to display
– Press and hold the SET button
– Change data: press the BIKE
– Confirm the setting: press the
TPC BIKE
ALTI
52
the NAVIGATOR function
or TPC button
SET button
Resetting the NAVIGATOR to ZERO
SET
– Show the navigator function on the display
– RESET: press and hold the BIKE button
TPC BIKE
ALTI
Light mode ON/OFF
SET
TPC BIKE
ALTI
ATTENTION:
the light mode is automatically deactivated after
a break to reduce the battery consumption.
– ON: press the TPC + SET
buttons simultaneously
– OFF: press the TPC + SET
buttons simultaneously
53