Function - Lincoln MKZ 2018 Quick Reference Manual

Function

Rear View Camera*
This system provides a video image of the area behind your
vehicle. The display appears in the touchscreen when the
transmission is in reverse (R) and uses green, yellow and red
guides to alert you of your proximity to objects.
Note: Mud, water or debris can obstruct the camera's view. Clean
the lens with a soft, lint-free cloth and non-abrasive cleaner.
Front and Rear Parking Aids*
Sounds a warning tone if there is an obstacle near the front or rear
bumper. The front sensors are active when the transmission is in
any position other than park (P) and your vehicle is traveling at low
speed. The rear sensors are active when the transmission is in
reverse (R) and your vehicle speed is below 3 mph (5 km/h). The
warning tone increases in frequency as the object gets closer.
See the Parking Aids chapter in your Owner's Manual for
complete information on your vehicle's sensing systems.
Adaptive Headlamps*
The headlamp beams move in the same direction as the steering
wheel, providing more visibility when driving around curves. Active
at speeds above 3 mph (5 km/h), it has a power-up movement
check feature. When you start your vehicle, the lamps track to a
predetermined position, then back to center to let you know the
system is working properly. To use, place the lighting control into
the autolamps* position .
14
Active Park Assist with Parallel Parking,
Perpendicular Parking and Parallel Park Out Assist*
Detects an available parallel or perpendicular
parking space and automatically steers the vehicle
into the space (hands-free) while you control the
accelerator, gearshift and brakes. The system
visually and audibly instructs you to park
your vehicle.
To use active park assist, press the button once for parallel
parking, or twice for perpendicular parking.
To stop the parking procedure, grab the steering wheel or
press the button again. For complete information, refer to
the Parking Aids chapter of your Owner's Manual.
Note:
The driver is always responsible for controlling the vehicle,
supervising the system and intervening, if required.
*if equipped
Configurable Daytime Running Lamps*
When you switch this feature on in the information display, daytime running
lamps turn on when you are driving, the lighting control is in the autolamps*
position and the headlamps are off .
You can switch the Confi gurable Daytime Running Lamps feature on or off using
the information display controls. See the Lighting chapter in your Owner's
Manual for complete information.
MyKey
TM
MyKey allows you to program certain driving restrictions in order to promote good
driving habits. You can program things such as speed restrictions and limited
volume levels. For complete information, refer to the MyKey chapter in your
Owner's Manual.
Lincoln Drive Control
Lincoln Drive Control delivers the Lincoln driving experience through a suite of
sophisticated electronic vehicle systems. These systems continuously monitor
your driving inputs and the road conditions to optimize ride comfort, steering
and handling.
*if equipped
2 01 8 M K Z
There are a range of modes from which you can choose to customize your ideal
driving experience. Use the information display to set your preference:
Normal: Delivers a balanced combination of comfortable, controlled ride and
confident handling.
Comfort: Provides a more relaxed driving experience, maximizing comfort.
Sport: Provides a sportier driving experience with an emphasis on handling
and control.
Refer to the Driving Aids chapter of your Owner's Manual for more details.
Adaptive Cruise Control*
The system adjusts your speed to maintain a set distance between you and the
vehicle in front of you in the same lane. You can select from one of four gap vehicle in front of you in the same lane. You can select from one of four gap
settings by pressing the and buttons on the steering wheel.
To set a cruise speed, accelerate to the desired speed, switch cruise control on,
select a gap setting and press the SET- button. An indicator light, the current gap
setting and your set speed appear in the information display.
Press CNCL to cancel cruise control. To resume your set speed, press the RES+
button and your vehicle returns to the set speed and gap setting.
To resume your set speed from a complete stop:
If your vehicle stops for less than three seconds, it automatically accelerates to
follow the vehicle ahead when you release the brake pedal.
If your vehicle stops for more than three seconds, you must press the RES+
button or the accelerator pedal to resume following the vehicle ahead.
Press the OFF button or switch off the ignition to turn off cruise control. See the
Cruise Control chapter in your Owner's Manual for complete details.
15