MEMORY FUNCTIONS
9.1 Creating a new series
Select the menu item Memory functions / Create new group to start a
measurement series. After a name for the series (see 4.4) has been entered,
the measuring window will open and the following readings are saved to this
series.
The measuring parameter cannot be changed, while a series of measurements
is taken.
Press ESC to close the series. You will be asked, if the series should be saved
finally.
9.2 Continuation of a series
To append further data to a series, select the menu item Memory functions /
Append data to series. The new data will be saved with the current time and
date.
9.3 Deleting a series
Select menu item Memory functions / Delete to delete a series.
9.4 Displaying a series
Select menu item Memory functions / Show to display a series and the
related statistics (see 5.5.1). The values can be altered or deleted.
9.5 Optional: Copying of series to an USB flash drive
If this option has been purchased, the measurement series can be copied to a
USB flash drive under the menu item Memory functions / Copy to USB flash
drive.
Thus it is possible, to call up series, without connecting the alphaDUR mini to
the computer. (see chapter 17 Option: Copying of series to an USB flash
drive).
27