BAQ alphaDUR mini Manual page 18

MEASUREMENT
Fig. 6: Values
To change a value the marker is set to the corresponding value with the cursor
key and then ENTER is pressed. Now a number entry field (see 4.5) is opened
and the measured value can be edited. With ENTER the change is accepted,
with ESC the number input is closed without accepting the change.
For the deletion of a value, the marker is set with the cursor key to the value to
be deleted and then DEL is pressed.
If the edit window is closed with ESC, a request is made as to whether the
changes should be accepted or rejected. If the changes are accepted, the
statistical values will be newly calculated.
The statistics window is closed with ESC. If the predetermined number of
statistical data is not yet reached (because the display of statistics was started
with key STAT or because a value has been deleted) the measurement series
will be continued.
The alphaDUR mini can be configured to display a query whether the data
should be saved as a new series (see 10.4.4) if the predetermined number of
data is reached when the window is closed. Likewise, it is possible to have a
query displayed whether the data should be printed (see 10.4.5).
18