6.5.5 Motor connector
Make sure the motor connector is assembled with a tight
fit on the control unit.
6.5.6 Motor connector
Make sure that the motor connector is attached tightly to
the control unit.
6.5.7 Communication cables
Make sure the 3 small communication cables are not
loose or damaged.
539 - 003 - 05.12.2018
6.5.8 Communication cables
Make sure the three small communication cables are not
loose or damaged.
6.5.9 The wiring cable
Make sure the 26-pin wiring cable is properly
assembled, dry and not damaged.
Troubleshooting - 27