Figure 2.3 Power Analog Out; Analog Output - ILX Lightwave OMH-6727B User Manual

2
C H A P T E R

Analog Output

Analog output representing the power measurement is located in the upper left
corner of the 6810B rear panel. The POWER ANALOG OUT is a non-calibrated
value between 0 and 10 volts representing the measured power as a percent of
full scale power within the selected gain range. For example, if the full scale power
for gain range three is 10 µ W and the displayed power is 5.000 µ W, then 5.0 volts
is present on the POWER ANALOG OUT connector.
8
OMH-6727B
O P E R A T I O N
Front Panel Controls

Figure 2.3 Power Analog Out