ILX Lightwave OMH-6727B User Manual page 18

1
C H A P T E R
Right Display (Wavelength)
Bargraph
Brightness
General Specifications
Operating Temperature
Storage Temperature
Humidity (non-condensing)
Overall Dimensions
Weight
Input Port Diameter
Input Type
Optical Stand Accommodations
Fiber Optic Adapter
Connector to Main Unit
1. Add + 0.5% from 1500 to 1630 nm.
2. Minimum optical power required for accurate wavelength measurement:
950 nm ~ 1200 nm
150 uW (-8.2 dBm)
1200 nm ~ 1630 nm
10 uW (-20 dBm)
3. MANUAL wavelength mode: Add +0.5% for automatic wavelength correction.
4. 1630 to 1650 nm: MANUAL wavelength mode only.
Our goal is to design and produce the best optical test equipment available
anywhere. To achieve this, we need your ideas and comments on ways we can
improve out products. We invite you to contact us at any time with your
suggestions.
4
OMH-6727B
I N T R O D U C T I O N A N D S P E C I F I C A T I O N S
Specifications
Units
Range
Resolution
-1
∆λ
nm, cm ,
500.0 to 1000.0 nm, 20,000 to 10,000 cm
-1
.1 nm, .1 cm Right Display (Wavelength)
Percent of full scale power
5 settings
o o
+ 15 C to +35 C
o o
-40 C to +70 C
> 100 µW: <85% RH
< 100 µW: <70% RH
68.6 mm diameter x 30.1 mm
< 0.5 kg
6 mm
Integrating sphere
8/32 tapped hole centered
FC, SC, ST
26 pin high-density sub-D
-1