Specifications - Allen-Bradley FLEX I/O 1794-TBN Installation Instructions Manual

12 FLEX I/O 240V AC Digital Input and Output Modules

Specifications

Specifications – FLEX I/O 240V AC Input Module 1794-IM16
Attribute
Number of inputs
Recommended terminal base unit
On-state voltage, min
On-state voltage, nom
On-state voltage, max
On-state current, min
On-state current, max
Off-state voltage, max
Off-state current, max
Nominal input impedance
Nominal input current
Isolation voltage
(1)
Input filter time
Off to On
On to Off
FlexBus current
Power dissipation, max
Thermal dissipation, max
(1)
Input off-to-on filter time is the time from a valid input signal to recognition by the module.
Input on-to-off filter time is time from the input signal dropping below the valid level to recognition by the module.
Publication 1794-IN123D-EN-P - August 2018
Value
16, nonisolated
1794-TBN, 1794-TBNK
159V AC
240V AC
264V AC
5.30 mA
13.29 mA
40V AC
2.6 mA
22.2 kΩ
11 mA @ 240V AC
250V (continuous), Basic Insulation Type, field side to backplane
Type tested at 1530V AC for 60 s
No isolation between individual channels
Refer to Input Filter Times table
32 mA @ 5V DC
6 W @ 264V AC
20.47 BTU/hr @ 264V AC