Attaching Small Accessories Tools - Hoover HS-WP7 User Manual

Using your
machine:
Attaching small accessory tools
1
Small accessory tools can be attached to the concentration
tool nozzle when using the reach wand or handheld.
First ensure the steam trigger is fully released, no steam
is comming out of the steamer and the concentration
nozzle has cooled down. Use the arrows to align the
accessory tool to the end of the concentration nozzle.
Twist accessory tool clockwise until locked into position
and secure. Turn anti-clockwise to remove.
Wipeout 7_UG for Taiwan_090716.indd 23
• IMPORTANT •
Always switch off the steamer and allow steamer to cool before attaching/
detaching the steam wand, floorhead, accessories and twin tank. Always stand
steamer securely against a wall/fixed structure or lie the steamer flat on the floor
in a suitable location so it doesnot become a trip hazard or can be stepped on.
When using the steam reach wand do not aim towards electrical components
such as light fittings, sockets and wiring.
Always check the accessories are clean and free from
debris, don't use if damaged, broken or worn.
After attaching your chosen accessory tool
gently pull to make sure it's locked into place.
• IMPORTANT •
9/7/2016 3:45:33 PM
20