What's In The Box - iConnectivity iConnectMIDI2+ Owner's Manual

What's in the box

• The iConnectMIDI 2 +
• One 5 ft 30-pin to iConnectivity USB (B) inline connection cable to connect the
interface to an iOS device that uses this connector.
• One USB-A to USB-B cable to connect the interface to a Mac or PC computer.
Please contact your dealer or iConnectivity directly if any of these three items were not
included in the packaging.
Not included: the optional power transformer for charging iOS devices. The power
transformer is only necessary for keeping an iOS device charged; the iConnectMIDI 2+
itself is powered over the USB bus (in USB Device port 2).
Please use only the iConnectivity 6V/18W center positive supply, or you risk damaging
the device. This adapter operates over a range of 100-240V/50 or 60Hz, so it can be
used internationally with wall plug adapters.
The optional power supply is available on www.iConnectivity.com directly or from your
dealer. Additional cables may be purchased independently or from the iConnectivity
website.
7