SECTION 20: GENERAL SPECIFICATIONS
20.1 Material Specifications
20.1.1 Reflectors
.024
Aluminium (Optional-
Type 304,
Standard Reflectors Only
20.2 Heater Specifications
20.2.1 Ignition
Fully Automatic, Three-Try, Direct Spark, Electronic
Ignition Control, 100% Safety Shut-Off.
General Specifications for CRV-Series heaters are as follows:
Standard Reflector
Model
CRV-B-2 (NG only)
CRV-B-4
CRV-B-6
CRV-B-8
CRV-B-9
CRV-B-10
CRV-B-12A (NG only)
CRV-B-12 (LP only)
*See Page 5, Section 3 for clearances to combustibles.
PIPE CONNECTION:
1/2" NPT
DIMENSIONS:
Vent Connection Size: 4" (10 cm) or 6" (15 cm)
Outside Air Connection Size: 4" (10 cm)
Refer to figure above for dimensional information.
GAS INLET PRESSURE:
"
Natural Gas: 4.5
wc Minimum 14.0
024 Stainless Steel
).
Heat Input Rate
(Btu/h) x (1000)
Minimum
20
40
12.5' (3.8 m)
60
80
20' (6.1 m)
90
100
110
35' (10.7 m)
120
35' (10.7 m)
"
wc Maximum
20.3 Suspension Specifications
Hang heater with materials with a minimum working
load of 75 lbs (33 kg). See Page 21, Figure 20.
20.4 Controls Specifications
Time switches, thermostats, etc. can be wired into
the electrical supply. External controls supplied as an
option.
Length "A"
Maximum
10' (3 m)
20' (6.1 m)
25' (7.6 m)
20' (6.1 m)
35' (10.7 m)
45' (13.7 m)
25' (7.6 m)
50' (15.2 m)
30' (9.1 m)
60' (18.3 m)
70' (21.3 m)
70' (21.3 m)
"
LP Gas: 10.5
wc Minimum 14.0
ELECTRICAL RATING:
120 V - 60 Hz, 0.3 A
SECTION 20: G
S
ENERAL
PECIFICATIONS
Recommended Minimum
Mounting Height*
Spot Heating
8' (2.4 m)
8' (2.4 m)
8' (2.4 m)
10' (3 m)
10' (3 m)
15' (4.5 m)
15' (4.5 m)
15' (4.5 m)
"
wc Maximum
81 of 85