Daikin FTKS09HV2S Service Manual page 19

Si041137
Step
5. Remove the signal
receiver PCB.
1 Unfasten the 3 hooks
and remove the signal
receiver PCB.
Disconnect the
2
connector [S48] from
the signal receiver
PCB.
6. Remove the display PCB.
The figure shows the
1
connection of the wire
harness for the display
PCB.
Removal Procedure
Procedure
Signal
receiver
PCB
[S48]
(R8090)
(R8091)
Display PCB
(R8094)
Removal of PCBs (Pattern 1)
Points
The display PCB is
positioned on the rear side of
the signal receiver unit.
17