Multi Fx Mode - Pioneer DDJ-SR Operation Manual

In this mode a single Effect is controlled with up to 6 Parameters and 3 Effect buttons. Only
the first 2 Parameters are visible on the GUI. More Parameters and Effect buttons can be
viewed in the FX GUI (opened from the + button on the GUI)
34. FX1 ON. Press this button to enable/disable the selected effect to the Left/Right
selected deck.
Hold SHIFT down and then use this button, to enable/disable the 1
the selected effect (if available).
35. FX2 ON. Press this button to select the previous effect from VirtualDJ Effects list.
Hold SHIFT down and then use this button, to enable/disable the 2
the selected effect (if available).
36. FX3 ON. Press this button to select the next effect from VirtualDJ Effects list.
Hold SHIFT down and then use this button, to enable/disable the 3
the selected effect (if available).
38. FX1 knob. Controls the 1
Hold SHIFT down to control the 4
39. FX2 knob. Controls the 2
Hold SHIFT down to control the 5
40. FX3 knob. Controls the 3
Hold SHIFT down to control the 6

Multi FX mode

Hold SHIFT down and then use the TAP button to select the Multi FX mode in the default
GUI.
Multi FX mode – 4 Decks Layout
In this mode 3 different Effects can be applied and controlled with up to 2 Parameters for
each FX slot. Only the first Parameter is visible on the GUI (and the 2
SHIFT is held on the DDJ-SR). More Parameters and Effect buttons can be viewed in the FX
GUI (opened from the + button on the GUI)
st
effect parameter of the selected effect.
th
effect parameter of the selected effect (if available).
nd
effect parameter of the selected effect.
th
effect parameter of the selected effect (if available).
rd
effect parameter of the selected effect.
th
effect parameter of the selected effect (if available).
VirtualDJ 8 – Pioneer DDJ-SR
st
effect button of
nd
effect button of
rd
effect button of
Multi FX mode – 2 Decks Layout
nd
Parameter while
10