Service Mode; Test Mode - Pioneer DJM-350 Service Manual

5

6. SERVICE MODE

6.1 TEST MODE

1. Description of Test Modes
The Following eight test modes are provided for this unit:
Mode No.
0 Mode for version confirmation
1 Mode for making all LEDs unlit
2 Mode for making all LEDs lit
3 Mode for confirmation of individual keys
4 Mode for confirmation of individual switches
5 Mode for confirmation of the values of the rotary variable controls
6 Mode for confirmation of fluctuated values of the rotary variable controls
7 Mode for confirmation of the meter LEDs
In Test mode, no audio processing is performed (no mixing function is available). To avoid any accidental failure,
never connect anything to the MASTER OUT connector or HEADPHONES output connector in Test mode.
2. Test Mode
Test Mode : ON
CH-1 CH-1
GATE
CUE FADER
button START button
button
Test Mode : CANCEL
POWER OFF
5
6
Description of The Modes
POWER ON
Test Mode
(Mode 0)
6
7
Confirmation of the version of the firmware
Confirmation of LED operations
Confirmation of operations of individual keys
Confirmation of operations of individual switches
Confirmation of operations of individual variable controls
Confirmation of meter-LED operations
Mode 0 Mode 1
Mode 7 Mode 6
• Press the p key to shift to the next mode.
• Press the o key to shift to the previous mode.
• You can confirm the current mode number while you hold
the TRACK MARK (PREVIEW) key pressed (the level
meter indicates a numeric value).
DJM-350
7
8
Purpose of Use
Mode 2 Mode 3
Mode 5 Mode 4
8
A
B
C
D
E
F
27