Table of Contents
Advertisement
5.2
Rear Panel Connectors (cont)
#
Name
1
LAN Connector
2
AUX CONTROL
Connector
3
SA AM P
Connector
4
SA THRU
Connector
5
EXTERNAL
PULSE
M ODULATION
Connectors
6
SCOPE
Connectors
7
SUPP Connector
R G S - 2 0 0 0 N G G e t t i n g S t a r t e d M a n u a l
Description
Used for rem ote control of the
Test Set via TCP/IP.
Future Use
Used for RF sam ple output that
is coupled and am plfied from
both the Top and Bottom
Receivers. (Typically used with
a diode detector.)
Used for RF sam ple output that
is coupled from both the Top
and Bottom Receivers.
(Typically used with a Spectrum
Analyzer.)
Used for I/O applications with
external equipm ent.
Used for testing of the UUT.
Used for testing of the UUT
(suppressor output).
S ubj ect to E xpor t C ontr ol , see C over P age for detai l s.
#
Name
8
ATE Line
Connector
9
GPIB Bus
Connector
10
Pow er
Connector
11
Pow er Sw itch
15
Description
Used for connection to external
equipm ent. The connector
contains discrete inputs,
discrete outputs and 429 Tx/Rx.
24-pin fem ale connector
conform ing to IEEE standard
488-1978 for interface of
general purpose program m able
instrum entation.
Standard 3-prong power
receptacle for connection to AC
power source (100 to 240 VAC
at 60 to 50 Hz).
Connects (I) or disconnects (O)
external AC power from the
RGS-2000NG.
Advertisement
Table of Contents
