Power On/Off Procedures; Power On Test Set; Power Off Test Set - Aeroflex RGS-2000NG Getting Started Manual

6.0

POWER ON/OFF PROCEDURES

6.1 Pow er ON Test Set
S T E P P R O C E D U R E
1. Press the Power Switch (Front Panel) to power ON
the Test Set.
2. Verify the Power Switch Indicator illum inates.
3. W ait while the Test Set com pletes the power-up
sequence.
The RGS-2000NG Main Menu is displayed.
6.2 Pow er OFF Test Set
S T E P P R O C E D U R E
1. Press the Power Switch (Front Panel) to power OFF
the Test Set.
2. Verify the Power Switch Indicator is not illum inated.
R G S - 2 0 0 0 N G G e t t i n g S t a r t e d M a n u a l
S ubj ect to E xpor t C ontr ol , see C over P age for detai l s.
16
( T h i s s c r e e n i s a r e p r e s e n t a t i o n o f t h e s c r e e n t h a t a p p e a r s . )