Alternator; Alternator, Change - Volvo Penta D1-13 Workshop Manual

32-1 Alternator

1
3
2
4
P0008154
P0008115
47701798 05-2013 © AB VOLVO PENTA

Alternator, Change

Current cut off at the main switches
1 Mark and undo all electrical connections to the
alternator.
2 Loosen the upper retaining nut (1).
Undo the tension bolt (2) to release the upper
retaining bolt (3) for the alternator.
Unscrew the lower retaining bolt (4) and remove
the alternator.
4
3 Put the new alternator in position and tighten the
lower retaining bolt. Tighten it loosely.
Put the upper retaining bolt in position and lightly
tighten the upper fixing nut. Screw the tension bolt
into the retaining bolt.
Put the drive belt in place and tension it with the
tension bolt.
IMPORTANT!
D1-30, D2-40: Ensure that the alternator belt is
placed in the groove closest to the alternator.
4 After checking the drive belt tension, tighten the
lower retaining bolt and upper retaining nut.
Install the electrical connections on the alternator.
32-1 Alternator
127