Seawater Pump, Change - Volvo Penta D1-13 Workshop Manual

2
P0008151
47701798 05-2013 © AB VOLVO PENTA
1
26-6 Sea Water System, Sea Water Pump

Seawater Pump, Change

Closed sea cock
1 Undo the hose connections (1) to the raw water
pump.
Undo the four bolts (2) that retain the raw water
pump.
2 Remove the raw water pump and the O-ring.
Check the mating surfaces.
NOTICE! Check the raw water pump gear wheel.
If the gear wheel is damaged, the idler gear must
be inspected as well.
3 Install a new raw water pump and O-ring.
Install the bolts and connect the hoses.
Open the sea cock and run the engine. Check the
sealing.
121