Nokia 9500 User Manual page 85

file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Proxies page
You may want to use a proxy to quicken access to the
Internet. Note also that some Internet service providers
require the use of Web proxies. Contact your Internet
service provider to determine proxy details.
If you have made an Internet connection to your
company's intranet, and are unable to retrieve Web
pages from the general Internet, you may need to
setup a proxy server to retrieve Web pages outside
your company's intranet.
Define the following:
• Proxy protocol — Select the protocol type of the
proxy. You can set different proxy settings for each
protocol.
• Use proxy server — Set this option to
the proxy server.
• Proxy server — Enter the IP address of the proxy
server, or the domain name. Example domain names
are: company.com and organisation.org.
• Port number — The number of the proxy port. The
port number is related to the protocol. Common
values are 8000 and 8080, but vary with every proxy
server.
• No proxy for — Define here the domains for which
the HTTP or HTTPS proxy is not needed.
Data call page
Define the following:
• Connection type — Define the GSM data call type.
To use High speed, the service provider must
support this feature, and if necessary, activate it for
your SIM card.
• Remote modem type — Define whether the device
uses an analog or digital connection. This setting
depends on both your GSM network operator and
Internet service provider, because some GSM
networks do not support certain types of ISDN
connections. For details, contact your Internet
service provider. If ISDN connections are available,
they establish connections more quickly than analog
methods.
• Modem speed — This option allows you to limit the
maximum connection speed. Higher data rates may
cost more, depending on the service provider. The
speed represents the maximum speed at which your
connection will operate. During the connection, the
operating speed may be less, depending on network
conditions.
Yes to use
• Modem initialization — You can control your
device using modem AT commands. If required,
enter characters specified by your service provider.
Script page
A script can automate the connection between the
device and the server. Contact your Internet service
provider to find out whether you need a script.
Define the following:
• Use login script — If you select Yes, you can write
or import a login script. You can edit the script in the
Login script field.
• Show terminal window — If you select Yes, once a
connection is established, you see the execution of
the script.
Page 85 Page 85 Jul 2, 2004 11:32:12 AM Jul 2, 2004 11:32:12 AM
85