Hide thumbs Also See for 9500:
Table of Contents

Advertisement

file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
file:///C:/USERS/MODEServer/tkoikkal/864507/RA-2_Erin/en/issue_1/ra-2_erin_en-us_1.xml
Note: As with any other radio transmitting
device, do not touch either of the antennas
unnecessarily when the device is switched on. Contact
with the antenna affects call quality and may cause the
device to operate at a higher power level than
otherwise needed. Not touching the antenna area
during a phone call optimises the antenna performance
and the talktime of your device.
Normal position: Hold the device with the antenna
pointed up and over your shoulder.

First start-up

The first time you switch your device on, you need to
set some basic settings. You can change the settings
later. Follow the instructions on the screen.
12
Page 12
Page 12
1. Select the language for the device, and press OK.
2. Select your current city from the list, and press OK.
You can browse for a city by starting to type the
name of the city, or using the scroll or arrow keys.
Note that it is important to select the correct city,
because scheduled calendar entries that you create
can change when the current city is changed.
3. Set the time and date, and press OK.
4. Press
OK
to create your own contact card.
5. Enter your contact card information, and press OK.
6. Press OK.
The default folders, such as
C:\My
files\and its
subfolders, are created during the first start-up. Note
that if you change the language of the device later,
folder names do not change.
Jul 2, 2004 11:32:12 AM
Jul 2, 2004 11:32:12 AM

Advertisement

Table of Contents
loading

Table of Contents