Slipping - Seawind 1000XL2 Owner's Manual

SLIPPING:

The diagrams below should be used as a reference when slipping the
Seawind 1000XL2.
The weight of the boat should be supported on its long keels. In addition to
this, props can be positioned near the bow and stern to ensure the boat does
not rock fore and aft. Care should be taken to ensure that the outboards (if
left down) and rudders do not make contact with cradle or any other object
likely to damage them.
965
540
1487
5152 1883 3666
Figure 1 Seawind 1000XL2 Slipping Diagram