Leightronix LabVault-SD Installation, Configuration, And Operation Manual page 32

FUNCTION
Send File
Get File Dir
Page 28
COMMAND
FINALIZE <FILENAME>
GETMPEGDIR
DETAILS
FILENAME is full
filename/ext of file to be
finalized. Filename is
case insensitive.
\Internal\mpeg\ directory
is assumed. File will no
longer be available for
playback.
NOTE: For finalize to
succeed, at least one
destination must be
configured and enabled
via the LABvault-SD Web
interface, otherwise the
result will be fail.
Ex.: FINALIZE BROOKS.
MPG
Gets the directory of the \
Internal\mpeg\ dir.
Ex.: 399 * 20683495
06-16-2009 14:32:30
00:00:30:07 BROOKS.
mpg
375 * 00003 MPEG Files
Returned
LABvault-SD
Control Commands
ASCII RESPONSE
• If successful: 200
Command OK
• If unsuccessful: 663
Cannot finalize file, no
destinations are enabled
For each entry:
399 * <FILESIZE> <MM-
DD-YYYY> <HH:MM:SS>
<LH:LM:LS:LF>
<FILENAME>
• <FILESIZE>: raw length
of file in bytes
• <MM-DD-YYYY>: last
write time date
• <HH:MM:SS>: last write
time
• <LH:LM:LS:LF>: MPEG
length in hours: minutes:
seconds: frames
• <FILENAME>: filename
of file
After last entry:
375 * nnnnn MPEG Files
Returned
2018-06-08