Table of Contents
Advertisement
5) IF you are not sure about the DNS, please do not check the "User configure manually" and
click ">>" to continue the next step. If you prefer to set up DNS manually, please check the
box first, and then enter DNS1 and DNS2 info.
6) You have to set up the ESSID (factory default is the EDIMAX) for your BR-6479Gn on this
page. If you want to set up the wireless security encryption, please click the check box of
"enabled WPA2 security encryption" first. Then enter the password (at least 8 characters) you
wish to have. If you do not want to set the encryption now or hope to apply other encryption
methods, you can uncheck the box of "enabled WPA2 security encryption", and click the next
">>", to complete iQ Setup first. Later, you can login the Web based management interface to
continue further configurations. For more encryption setting instructions, please refer to 8-3
Encryption Setting.
After you click the ">>", you will see the page shown with message that the system is
restarting. It may take a few minutes to proceed, please be patient to wait.
16
Advertisement
Table of Contents
