Maintenance; Periodic Maintenance; Spark Plug - ALDI Workzone Titanium+ 62007 User Manual

2200w inverter generator with pure sine wave
Table of Contents

Advertisement

Maintenance

Maintenance

Periodic Maintenance

Periodic maintenance
Item
Remarks
Check condition, adjust gap and

Spark plug

clean. Replace if necessary.
Check oil level.
Engine oil
Replace.
Clean. Replace if necessary.
Air filter
Clean Fuel extension filter.
Fuel extension
Replace if necessary.
filter
Check and adjust when engine
Valve clearance
is cold.
Check fuel hose for crack or
Fuel line
damage. Replace if necessary.
Check for leakage. Retighten or
Exhaust system
replace gasket if necessary.
Check muffler screen. Clean/
replace if necessary.
Check choke operation.
Carburettor
Check On/Off switch ignition
Starting system
operation.
More frequently if necessary.
Decarbonisation
Check all fittings and fasteners
Fittings/
correct if necessary.
fasteners
Regular maintenance is most important for the best performance and safe operation.
Your generator should be kept clean and dry at all times. The generator
should not be stored or operated in environments that includes excessive
moisture, dust or any corrosive vapours. If these substances are on the
generator, clean with a cloth or soft bristle brush. Do not use a garden hose
or anything with water pressure to clean the generator. Water may enter the
cooling air slots and could possibly damage the rotor, stator and the internal
windings of the generator head.
28
e-mail: help@powertoolsupport.com
MODEL: №. EP2800i • 09/2018 • 62007
Digital Inverter Generator with Pure Sine Wave
Pre-operation
Initial 1
Every 3
Every 6
check (daily)
months
months
months
or 20Hr
or 50Hr
or 100Hr
AFTER SALES SUPPORT
1800 909 909
Digital Inverter Generator with Pure Sine Wave
Spark Plug
To ensure the engine is operating correctly, the spark plug must be properly
gapped and free of carbon deposits. Always check the spark plug cable is
firmly fitted to the top of the spark plug.
Every 12
months
1. Pull the spark plug lead (19) off the spark plug (20) and then remove spark
or 300Hr
2. Remove carbon deposits using a wire brush.
3. Check for discoloration on the top of the spark plug (20).
4. Check the spark plug gap. The acceptable gap should be between
Replacement spark plugs are available from purchase from lawn mower or
small engine repair shops.
AFTER SALES SUPPORT
(toll free)
(toll free)
WARNING: Ensure the engine is switched off while undertaking
this task.
plug (20) from the generator using the supplied spark plug spanner by
rotating in a clockwise direction (Fig Y).
The standard colour should be a tan colour.
0.6 – 0.8mm (Fig. Z).
CAUTION: Check that no foreign material, debris, or dust enters the
crankcase.
Y.
1800 909 909
Maintenance
Z.
29
e-mail: help@powertoolsupport.com
MODEL: №. EP2800i • 09/2018 • 62007

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents