Maintenance - ALDI FERREX XG-KF2000 User Manual

Maintenance

Your generator should be kept clean and dry at all times. The generator
should not be stored or operated in environments that includes excessive
moisture, dust or any corrosive vapours. If these substances are on the
generator, clean with a cloth or soft bristle brush. Do not use a garden hose
or anything with water pressure to clean the generator. Water may enter the
cooling air slots and could possibly damage the rotor, stator and the internal
windings of the generator head.
Periodic Maintenance
Item Remarks
Spark plug Check condition, adjust gap and
clean. Replace if necessary.
Engine oil Check oil level.
Replace.
Air filter Clean. Replace if necessary.
Fuel extension Clean Fuel extension filter.
filter
Replace if necessary.
Valve clearance Check and adjust when engine
is cold.
Fuel line Check fuel hose for crack or
damage. Replace if necessary.
Exhaust system Check for leakage. Retighten or
replace gasket if necessary.
Check muffler screen. Clean/
replace if necessary.
Carburettor Check choke operation.
Starting system
Check On/Off switch ignition
operation.
Decarbonisation
More frequently if necessary.
Fittings/ Check all fittings and fasteners
fasteners
correct if necessary.
Regular maintenance is most important for the best performance and safe operation.
26
e-mail: info.aldi@positecgroup.com
MODEL: . XG-KF2000 • 03/2020 • 700069
Digital Inverter Generator with Pure Sine Wave
Periodic maintenance
Pre- Initial 1
operation months
check (daily) or 20Hr
•
•
•
•
•
Every 3 Every 6
months months
or 50Hr or 100Hr
•
• •
•
•
•
•
AFTER SALES SUPPORT
Every 12
months
or 300Hr
•
•
1300 889 028
(toll free)