Lee Technology LTK-1100HN User Manual page 7

Use "#/Select" key to select AM or PM
After the correct time is set, press the "ENTER" or "*/Menu" key to return to the main menu or
press the "CANCEL" key twice to exit the system setting menu.
2) Sleep Time
With this feature, you can turn off all of your pagers at once automatically.
To turn OFF this function
Press "#/Select" key to turn the feature "OFF"
Press "ENTER" to go back to the main menu.
To turn ON this function and change the sleep time
Press "#/Select" key to turn the sleep time "ON"
Set the hour and then press "ENTER" key
Set the minutes and then press "ENTER" key
Use the "#/Select" key to select AM or PM
After suitable time is set, press the "ENTER" or "*/Menu" key to return to the main menu or
press "CANCEL" key twice to exit the system setting menu.
3) Range Test
With this feature, you can test the range coverage of your Paging System.
and find out how far your transmitter will cover.
Remove your pager from the charger.
At the range test menu, press "#/Select" key to turn range test "ON"
Press "ENTER" to start the range test. And then, your transmitter will send paging signal to
your pager every 10 seconds.
When your pager receives the paging signal, it will flash.
If the pager does not flash anymore, it means that the pager can not receive any
signal from its transmitter.
To stop range test, please press "CANCEL" key.
4) Pre Set Message
With this feature, you can turn ON of OFF the function of pre-set message.
However, this function is not important for Paging System.
5) Set Pager Alert
With this feature, you can select alert type of your pager.