Table of Contents
Advertisement
Range Test is off. (Testing range is only necessary for very large properties)
Coasters are set to Flash & Vibrate when paged.
Duty Alert is off.
Out of Range alert is off.
* Some major points to remember when installing the equipment
- Never install aerials near to overhead power lines or adjacent to telephone or public
address or Data communication lines.
- Avoid, where possible, running aerial feeder cables alongside other cables e.g.:
telephone and mains.
- Avoid mounting the Transmitter in the immediate vicinity of telephones, exchanges or
equipment.
3. SETTING TRANSMITTER
To enter programming mode, press the "SETUP" button and enter the password " 2580 " followed by
"ENTER" key. If the password is accepted, the display will show "Use * to Scroll to menu options"
Use the "*/Menu" key to scroll through the several menu options or press "CANCEL" to exit the system
setting menu.
1) Set Current Time
With this feature, you can setup current time of Transmitter.
At the "Set Current Time" menu, set the hour and then press "ENTER" key.
Set the minutes and press "ENTER" key.
Advertisement
Table of Contents
