Equipment Setup; Wall Mount - Lee Technology LTK-1100HN User Manual

1. EQUIPMENT SETUP

1) Keypad Sending Unit
Unwrap all sending unit components. Lock the antenna into the hole in the upper right
hand corner of the sending unit. Plug the power supply with the large tip into a
standard 110 outlet and plug it into the back of the sending unit. We recommend some
type of surge suppressor on the power sup protection. Power surges are not covered
under system warranty!
2. PLACEMENT & MOUNTING INSTRUCTIONS
1) DESKTOP
You can use your transmitter with the 20 degree wedge attached or remove the wedge
and lay the Transmitter flat.

2) WALL MOUNT

To mount your Transmitter on a wall