Related Manuals for Lee Technology LTK-1100HN
Summary of Contents for Lee Technology LTK-1100HN
- Page 1 LTK-1100HN User Manual www.leetek.org leetek2001@yahoo.co.kr Lee Technology Korea.Co.,Ltd(LEETEK) 3rd #499-2 Sang3dong, Wonmi-gu, Puchon-city, kyunggi-do, Korea T:82-32-324-9838/9 F:82-32-324-9840...
- Page 2 Installers must ensure that the final installation operates satisfactorily within the relevant regulatory requirements. Lee Technology accepts no responsibility for incorrect installation. Lee Technology reserves the right to change products, specifications and installation data at any time without notice.
-
Page 3: Specification
SPECIFICATION ● Pocsag Code ● Carrier frequency : 457.575 MHz +/-200Hz ● Frequency Range: 450.025 ~ 469.975MHz ● FM modulation & GFSK (frequency shift keying) ● FM Accuracy : +/-5% 4.275< 4.5 < 4.725 ● Date Rate: 1200BPS, 600Hz +/-5Hz ●... -
Page 4: Equipment Setup
1. EQUIPMENT SETUP 1) Keypad Sending Unit Unwrap all sending unit components. Lock the antenna into the hole in the upper right hand corner of the sending unit. Plug the power supply with the large tip into a standard 110 outlet and plug it into the back of the sending unit. We recommend some type of surge suppressor on the power sup protection. -
Page 5: System Configuration
● Remove the plastic bracket (included) under the Transmitter unit by unlocking the 2latches. ● Place the plastic bracket against the wall and with the aid of a pencil, mark the position of the mounting holes. (Refer to figure below). Mount the Transmitter in a convenient location where a power outlet is available. -
Page 6: Setting Transmitter
Range Test is off. (Testing range is only necessary for very large properties) Coasters are set to Flash & Vibrate when paged. Duty Alert is off. Out of Range alert is off. * Some major points to remember when installing the equipment - Never install aerials near to overhead power lines or adjacent to telephone or public address or Data communication lines. - Page 7 Use “#/Select” key to select AM or PM After the correct time is set, press the “ENTER” or “*/Menu” key to return to the main menu or press the “CANCEL” key twice to exit the system setting menu. 2) Sleep Time With this feature, you can turn off all of your pagers at once automatically.
- Page 8 Be sure that all pagers are returned before performing this procedure. Remove all the pagers from the charger. At the “Set Pager Alert” menu, press “#/Select” key to scroll through the different alert options. After making a selection, press “ENTER” key 2 times. After sending the message, the pagers will now respond with your new selected alert mode.
- Page 9 With this feature, you can send a designated message to your pagers. However, this function is not important for Paging System. 9) Set Frequency With this feature, you can set your frequency among 11 frequencies. Press “#/Select” key to scroll through the 11 frequencies. Select your frequency and press “ENTER”...
- Page 10 4. HOW TO USE NOTE : Changing the frequency of is possible only by the manufacturer. Coaster 1) Franchise Restaurant, Hotel Restaurant (1) Direction for Use - For calling waiting customer (2) Process - If a restaurant does not have enough seats for their customers, the staff at the front door, gives a pager to the waiting customer.
- Page 11 (2) Process - When customers place an order, the staff gives a pager with receipt to the customers. - The customers wait for their order at table. For their waiting time, they could talk with their friends, read a book, and do shopping with their pagers.
-
Page 12: Troubleshooting
Troubleshooting Transmitter will not display anything a. Make sure there is power to the outlet b. Check all connections. If you try all this and the transmitter still wont power up your power supply may be bad. If display is still blank, call LEETEK. Before you call, try some of the following suggestion *Remember that the capability of your system will be affected by: Foil backed wallboard, Metal mesh, wire reinforced glass, metal sheeting, large mirrors, suspended ceilings, lift... - Page 13 radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ● Reorient or relocate the receiving antenna. ●...
-
Page 14: Warranty
WARRANTY LeeTek warrants this product against any defects that are due to faulty material or workmanship for a one-year period after the original date of consumer purchase. This warranty does not include damage to the product resulting from accident, misuse or improper electrical connection. -
Page 15: Hints And Tips
Be certain staff members understand the importance of asking for the transmitter back after work. Benefits of a VISUAL paging system Staff members are alerted thru the pager and know to quickly close the tab of a guest to help speed table turns. LEE TECHNOLOGY KOREA CO., LTD.