Inserting Batteries; Carrying The Unit - Sony MHC-V72D Operating Instructions Manual

4)
Connect the AC power cord (mains
lead) last. The demonstration starts
automatically. If you press  (power) to
turn on the system, the demonstration
ends.
Note
Do not connect this system to the TV
• •
through the video deck.
When the audio signals input to the
• •
HDMI OUT (TV) ARC connector of the
system are other than 2-channel Linear
PCM signals, the messages "CODE 01"
and "SGNL ERR" appear on the display
of the unit (page 66).
Hint
• • You can also enjoy the sound of audio/
video equipment via the system
(page 59).
You can also connect the audio input
• •
jacks of an optional equipment (VCR,
etc.) to the AUDIO/PARTY CHAIN
OUT L/R jacks. For details, refer to
the operating instructions of your
equipment.
You can enjoy the Wired Party Chain
• •
function by connecting another audio
system to this system (page 49).
If the audio output level from the
• •
system is low when connecting the
optional equipment, try adjusting
the audio output settings on the
connected equipment. It may improve
the audio output level. For details, refer
to the operating instructions of your
equipment.

Inserting batteries

Insert the two supplied R03 (size
AAA) batteries, matching the
polarities shown below.
18
GB
Note
Do not mix an old battery with a new
• •
one or mix different types of batteries.
If you do not use the remote control
• •
for a long period of time, remove the
batteries to avoid damage from battery
leakage and corrosion.
To operate the system using the
remote control
Point the remote control at the unit's
remote control sensor.

Carrying the unit

The unit has caster wheels so that
you can roll it easily.
The caster wheels can be used only
on flat surfaces. Lift the unit by two
people on uneven surfaces using
the handles on the unit. Correct
hand placement while carrying
the unit is very important to avoid
personal injury and/or property
damage.
Before carrying the unit, disconnect
all the cables.