Sony MHC-V72D Operating Instructions Manual page 28

[4:3 PAN SCAN]: Selects this
when you connect a 4:3 screen TV
that does not have a wide-mode
function. Displays a full-height
picture on the entire screen, with
trimmed sides.
[4:3 OUTPUT]
[FULL]: Selects this when you
connect a TV with a wide-mode
function. Displays a 4:3 screen
picture in 16:9 aspect ratio even on a
wide-screen TV.
[NORMAL]: Changes the picture size
to fit the screen size with the original
picture aspect ratio. Displays black
bands on the left and right side if
you display a 4:3 screen picture.
[COLOR SYSTEM(VIDEO CD)]
(Except for Latin American,
European, and Russian models)
[AUTO]: Outputs the video signal
according to the color system of the
disc. Select this setting if your TV
uses a DUAL system.
[PAL]: Outputs the video signal in
PAL system.
[NTSC]: Outputs the video signal in
NTSC system.
For details, see "Changing the color
system" (page 19).
28
GB
[PAUSE MODE]
[AUTO]: The picture, including
subjects that move dynamically, is
output with no jitter. Normally select
this setting.
[FRAME]: The picture, including
subjects that do not move
dynamically, is output in high
resolution.
Setting the audio options
– [AUDIO SETUP]
[AUDIO DRC]
(Dynamic Range Compression)
[OFF]: Off.
[STANDARD]: Selects this when
watching movies at low volume
late at night. The dynamic range
is compressed as intended by the
recording engineer.
[TRACK SELECTION]
[OFF]: No priority given.
[AUTO]: Gives priority to the sound
track which contains the highest
number of channels when you play
back a DVD VIDEO on which multiple
audio formats (PCM, MPEG audio, or
Dolby Digital) are recorded.
[A/V SYNC]
(Video files only)
[OFF]: Does not adjust.
[ON]: Adjusts the delay between
picture and sound when the sound
does not synchronize with the
displayed picture.