Table of Contents
Advertisement
1. Safety precautions
Before installing the unit, make sure you read all the
"Safety precautions"
The "Safety precautions" provide very important points
regarding safety. Make sure you follow them
Symbols used in the text
Warning:
Describes precautions that should be observed to prevent danger of injury or death to the user.
Caution:
Describes precautions that should be observed to prevent damage to the unit.
Warning:
Carefully read the labels affixed to the main unit
Warning:
•
Ask the dealer or an authorised technician to install the unit
- Improper installation by the user may result in water leakage, electric shock, or fire
•
Use the specified cables for wiring. Make the connections securely so that any outside forces acting on the cables are
not applied to the terminals
- Inadequate connection and fastening may generate heat and cause a fire
•
Never repair the unit. If the controller must be repaired, consult the dealer
- If the unit is repaired improperly, electric shock, or fire may result
•
When handling this product, always wear protective equipment. EG: Gloves, full arm protection and safety glasses
- Improper handling may result in injury
•
Have all electric work done by a licensed electrician according to "Electric Facility Engineering Standard", "Interior Wire
Regulations" and the instructions given in this manual and always use a special circuit
- If the power source capacity is inadequate or electric work is performed improperly, electric shock and fire may result
•
Keep the electric parts away from any water - washing water etc...
- Contact may result in electric shock, fire or smoke
•
Do not reconstruct or change the settings of the protection devices
- If the protection device is shorted or operated forcibly, or parts other than those specified by Mitsubishi Electric are used, fire or
explosion may result
•
To dispose of this product, consult your dealer
Caution:
•
Ground the unit
- Do not connect the ground wire to gas or water pipes, lightning rods, or telephone ground lines. Improper grounding may result
in electric shock
•
Install the power cable so that tension is not applied to the cable
- Tension may cause the cable to break and generate heat which may, in turn, cause fire
•
Install a leak circuit breaker, as required
- If a leak circuit breaker is not installed, electric shock may result
•
Use power line cables of sufficient current carrying capacity and rating
- Cables that are too small may leak, generate heat, and cause a fire
•
Use only a circuit breaker and fuse of the specified capacity
- A fuse or circuit breaker of a larger capacity or a steel or copper wire may result in a general unit failure or fire
•
Be careful that the installation base is not damaged
- If the damage is left uncorrected, the unit may fall and cause personal injury or property damage
•
Be very careful regarding product transportation
- Two people should be used to carry products of 20kg or more
- Some products use PP bands for packaging. Do not use any PP bands for a means of transportation
•
Safely dispose of the packing materials
- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries
- Tear apart and throw away plastic packaging bags so that children will not play with them - If children play with a plastic bag
which has not been torn apart, they face the risk of suffocation
Page 9 of 25
Advertisement
Table of Contents
