INVERTER
Enclosure surface operation panel
FR-PA07
Thank you for purchasing the enclosure surface operation panel (FR-PA07). This instruction manual
gives handling information and precautions for use of this equipment. Incorrect handling might
cause an unexpected fault. Before using the equipment, please read this manual carefully to use the
equipment to its optimum performance.
Please forward this instruction manual to the end user.
This product is an option dedicated for the FR-E700 series.
Refer to the inverter unit's instruction manual for details on the operation panel functions, operation
methods and handling methods.
Operate the keys with dry hands to prevent an electric shock.
Do not install and operate the enclosure surface operation panel (FR-PA07) if it is damaged
or has parts missing.
Provide a safety backup device, such as an emergency brake, to protect machines and
equipment from hazardous conditions if the enclosure surface operation panel (FR-PA07)
becomes faulty.
To prevent damage from static electricity, touch a piece of metal nearby before touching this
product to remove any body static electricity.
1. Instructions
For the FR-E700 series inverters manufactured during or before the period shown by the
following serial numbers, there are restrictions mentioned below.
1) Parameter copy (
verification) does not function. Display turns into the reading indication, but reading is
not executed. If writing or verification is executed, an error occurs.
2) Initial value change list (
3) Easy setting mode (press
change the operation mode.
4) SERIAL number check
Refer to the inverter manual for the position of the rating plate.
Rating plate example
Symbol Year
Type
FR-E720-0.1K to 0.75K
FR-E720-1.5K to 5.5K
FR-E720-7.5K
FR-E720-11K, 15K
INSTRUCTION MANUAL
Safety precautions
) is displayed, but parameter copy (reading, writing, or
) cannot be used.
and
Month
Control number
SERIAL (Serial No.)
SERIAL number
J7
K7
L7
G7
simultaneously (0.5s)) cannot be used to
The SERIAL consists of 1 version symbol, 2
numeric characters or 1 numeric character and
1 alphabet letter indicating year and month, and
6 numeric characters indicating control number.
Month is indicated as 1 to 9, X (October), Y
(November), and Z (December).
Type
FR-E740-0.4K to 7.5K
SERIAL number
D7
1