Autoscript EPIC-IP User Manual page 13

Installation
Fitting the Reflective Glass Panel
WARNING! Risk of personal injury or injury to others.
!
Care must be taken when handling and installing the
reflective glass panels.
WARNING! Only use the correct size glass panel designed
!
for the installed hood.
When the hood has been installed, the reflective glass panel can be
fitted to the prompter assembly.
Panel Orientation
For the EPIC-IP prompter to display images, it is essential that the
reflective side of the glass is installed facing outwards. The reflective
side of the glass can be established as follows:
Carefully hold a blunt
object such as a coin
against the surface of the
glass.
If the object is being held
against the reflective side,
there will be no gap (depth
of the glass) before the
reflection.
11
Fitting Glass Panel
1. Remove all the fixing screws from the top of the hood to release
the top glazing bar.
2. Carefully position the glass panel on the bottom glazing bar inside
the hood.