Table of Contents
Advertisement
SERVICE
If permanent green, download OK.
If permanent red of flashing red, download OK.
Check that the smart card is a new card (if it has been used previously it is empty).
Disconnect the appliance from the supply, disconnect the smart reader and smart card, try again.
6) Disconnect the appliance from the main supply.
7) Disconnect the smart reader.
B) Use of PC with MEMWRITER installed + HW KEY
In order to program (or re-program) the Mainboard (ACU) of these products you need to find the
"industrial code" and the "serial number" on the label on the back of the product, below the bar
code as showed in the below picture (Fig.5).
Insert the industrial code and the serial number in the memwriter software and reprogram the
mainboard (Fig.6).
© Whirlpool EMEA
This document is only intended for qualified technicans who are aware of the respective safety regulations.
Whirlpool EMEA
Customer Service
Subject to modifications
Service Bulletin 481271240417
page 2 of 3
www.scc-service.com
Hide quick links:
Advertisement
Table of Contents
