Xerox Phaser 6100 User Manual page 23

2.6
U P
SING APER OR
5
Do not exceed the maximum stack height. Overfilling the
tray may cause a paper jam. Do not load more than 30
transparencies in Tray 1.
6
While pinching the paper guide as shown, move it toward
the paper until it lightly touches the side of the stack. Do
not press the guide too tightly against the edge of the
paper; the guide may bend the paper.
N
: If you want to change the paper size in the tray, refer to
OTE
page 2.7.
7
Slide the tray back into the printer.
8
When you print a document, select the paper type, paper
size and tray selection in your software application. For
details, see page 3.7.
S
PECIALTY