Xerox Phaser 6100 User Manual page 28

If you want to print on previously printed paper from the
Multi-purpose Tray, the printed side should be facing up
with the uncurled edge towards the printer. If you
experience problems with the paper feeding, turn the paper
around.
N
: Make sure that you have
OTE
not loaded too much paper.
The paper buckles if you load a
stack that is too deep or if you
push it in too far.
5
When you print a document, set the tray selection to MPT
and select the correct paper type in the software
application. For details, see page 3.7.
N
: After printing fold away the
OTE
paper support extension and close
the Multi-purpose Tray.
U P S
SING APER OR PECIALTY
2
2.11