Xerox Phaser 6100 User Manual page 49

3.8
P T
RINTING ASKS
Property
Tray
3
Selection
4 Type
Cover
5
Page
Source
6 Scaling
Description
Make sure that Tray Selection is set to the
corresponding paper tray.
Use the Manual source when printing to
specialty media. You have to load one sheet
at a time into the Multi-purpose Tray. See
page 2.9.
If the tray selection is set to Auto Select,
the printer automatically picks up paper in
the following order: Multi-purpose Tray,
Tray1, Optional Tray2.
Make sure that Type is set to Plain Paper.
If you load a different type of paper, select
the corresponding paper type. For more
information on paper, refer to Chapter 2,
"Using Paper or Specialty Media."
If you use cotton paper, which weighs from
16lb to 24lb (60~90g/m
25% and Gilbert 100%, set the paper type to
Cotton for the best printing.
To use recycled paper, which weighs from
20lb to 24lb (75~90g/m
select Colored.
This property allows you to print the first
page using a different paper type from the
rest of the document. You can select the tray
selection for the first page.
For example, load thick stock for the first
page into the Multi-purpose Tray, and plain
paper into Tray1. Then, select Tray1 in the
Tray Selection option and MPT in the
Cover Page Source option.
Scaling allows you to automatically or
manually scale your printer job on a page.
You can choose from None, Scale Printing,
Fit to Page. For details, see page 4.4 and
page 4.5.
2
), such as Gilbert
2
), or colored paper,