Procedure 2 Connector Check And Replacement Check - Toshiba Satellite L650 Maintenance Manual

2.6 SSD

Procedure 2 Connector Check and Replacement Check

The SSD or system board may be faulty. Disassemble the computer following the steps
described in Chapter 4 and perform the following checks:
Check 1 Make sure the following connectors have been firmly connected to the SSD,
system board and CPU.
SSD
If any connector is loose or off, reconnect it firmly and return to Procedure 1.
If there is still an error, perform Check 2.
Check 2 The SSD may be damaged. Replace it with a new one following the
disassembling instructions in Chapter 4. If the problem persists, perform
Check 3.
Check 3 The System board may be damaged. Replace it with a new one following
the disassembling instructions in Chapter 4.
perform Check 4.
Check 4 The CPU may be damaged. Replace it with a new one following the
disassembling
Satellite/Satellite Pro/L650/L655
System board
instructions
Maintenance Manual
2 Troubleshooting
CPU
If the problem persists,
in Chapter 4.
2-17