Listening To A Cd Or Mp3 Disc - Sharp CD-BH20 Operation Manual

Listening to a CD or MP3 disc

■ Disc playback
1
Press the (ON/STANDBY) button to turn the power on.
2
Press the INPUT button repeatedly on the main unit to
select CD function.
3
Press the (OPEN/CLOSE) button to open the disc com-
partment.
4
Place the disc on the disc compartment, label side up.
5
Press the (OPEN/CLOSE) button to close the disc tray.
6
Press the / (CD / ) button to start playback.
To stop playback:
Press the button.
Caution:
● Do not place two discs in one-disc-tray.
● Do not play discs of special shapes (heart, octagon, etc). It
may cause malfunction.
● Do not push the disc tray while it is moving.
● If the power fails wait until the power is restored.
● If TV or radio interference occurs during CD operation, move
the unit away from the TV or radio.
● If using an 3" (8 cm) disc, ensure that it is placed in the cen-
ter of the disc tray.
● Due to the structure of the disc information, it takes longer
to read an MP3 disc than a normal CD (approximately 20
to 90 seconds).
Note for CD or MP3 disc:
● Rewritable multi-session discs with unfinished writing,
can still be played.
■ To resume playback after stopping (re-
sume play) (MP3 only)
You can resume playback from the track playback is stopped.
1
While a disc is playing, press the
2
To resume play, press the CD / button. Playback resumes
from the track you stopped.
To cancel the resume playback:
Press the button twice.
button once.
E-11
■ Various disc functions
Function Main Remote
unit control
Play
Pause
Stop
Track
up/down
Fast
forward/
reverse
■ Random play
To random play all tracks:
Press PLAY MODE button on the remote control repeatedly until
"Random" appears. Press the / (CD / ) button.
To cancel random play:
Press the PLAY MODE button again until "Normal" appears. "RDM"
indicator will disappear.
Notes:
● If you press the
you can move to the track selected next by the random
operation. However, the
you to move to the previous track. The beginning of the
track being played will be located.
● In random play, the unit will select and play tracks au-
tomatically. (You cannot select the order of the tracks.)
● In folder mode on, only tracks in selected folder will be
played randomly.
Operation
Press in the stop mode.
Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.
Press in the playback
mode.
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the / button to start
the desired track.
Press and hold down in
the playback mode.
Release the button to
resume playback.
button during random play,
button does not allow