Advertisement
Available languages
Available languages
Quick Links
WARNING
!
•
Do not touch glass until cooled.
•
Allow glass to cool completely before any maintenance, as it will remain hot after appliance is no longer operating.
•
Ensure the appliance is completely cool before starting installation.
•
To avoid danger of suffocation keep the packaging bag away from babies and children. Do not use in cribs, bed,
carriages, or play pens. This bag is not a toy. Knot before throwing away.
You will need:
Installer: Leave this leaflet with the appliance. Consumer: Retain this leaflet for future reference.
1
Loosen set screw, unthread and remove the
decorative bypass pull knob.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
Bypass Damper Retrofit Kit
Allen key
2 x 1/4" Hex Nut
2 x Lockwasher
NZ3000H
2 x 7/16"
wrench
2 x 1/4" Hex Head
Screw
2
Remove the 4 screws securing the top inset to the
appliance. Remove the 2 screws securing the bottom inset
• 1(866)820-8686
Drill
2 x Bypass Stopper
Block
X6
to the appliance.
• www.napoleon replaces.com
Robertson
drill bit
W415-1824 / 03.09.18
Advertisement
Related Manuals for Napoleon NZ3000H
Summary of Contents for Napoleon NZ3000H
- Page 1 Loosen set screw, unthread and remove the appliance. Remove the 2 screws securing the bottom inset decorative bypass pull knob. to the appliance. W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 2 1” Stopper blocks should be located 1” (25mm) (25mm) back from the notch on the bypass damper rod. Stopper block Notch W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 3 Ensure the stopper blocks do not move. Reinstall both doors, top inset, bottom inset, and the decorative bypass pull knob. W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleon replaces.com...
- Page 4 Enlevez les 4 vis fixant le panneau supérieur sur l’appareil. Enlevez les 2 vis fixant le panneau inférieur sur l’appareil. retirez la bouton décorative du tige de dérivation. W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleonfoyers.com...
- Page 5 Les blocs de bouchon devraient être situés 1” (25mm) (25mm) retour de l’encoche sur le tige de dérivation. Bloc de bouchon Encoche W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleonfoyers.com...
- Page 6 Assurez-vous que les blocs de bouchon ne bougent pas. Réinstallez chaque portes, le panneau supérieur, le panneau inférieur, et la bouton décorative du tige de dérivation. W415-1824 / 03.09.18 Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada • 1(866)820-8686 • www.napoleonfoyers.com...