Table of Contents
Advertisement
Current time.
Battery status.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites.
the status bar indicates the satellite signal strength (see
page
1). Acquiring satellites can take several minutes.
1
Turn on the device.
2
If necessary, go outdoors to an open area, away from tall
buildings and trees.
3
If necessary, hold
to view detailed information about the
satellite signals.
Viewing GPS Signal Status
Hold
for three seconds.
Transportation Modes
Motorcycle mode
Automobile mode
Off-road mode (See
Routing and navigation are calculated differently based on your
transportation mode.
Choosing a Transportation Mode
Select
.
Battery Information
After the device is connected to power, it begins to charge.
in the status bar indicates the status of the internal battery.
To increase the accuracy of the battery gauge, you should fully
discharge the battery and then fully charge it. Do not unplug the
device until it is fully charged.
Setting the Time
NOTE: You can select Automatic to automatically set the time
each time the device is powered on.
1
Select
.
2
Scroll the numbers to set the time.
Using the On-Screen Buttons
• Select
to return to the previous menu screen.
• Hold
to quickly return to the main menu.
• Select
or
to see more choices.
• Hold
or
to scroll faster.
• Select
to see a menu of options for the current screen.
Using the On-Screen Keyboard
See "Language and Keyboard Settings" to change the keyboard
layout
(page
13).
• Select a character on the keyboard to enter a letter or
number.
• Select a series of letters, such as "A-I," to select a letter in
that series.
• Select
to add a space.
• Select
to delete a search entry.
• Select
to delete a character.
• Select
to change the keyboard language mode.
• Select
to enter special characters, such as punctuation
marks.
• Select
to change character capitalization.
2
page
6)
About Shortcuts
Adding a Shortcut Icon
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
in
The Where To? menu can contain up to 36 shortcut icons.
1
Select Where To? > Add Shortcut.
2
Select an item.
Removing a Shortcut
1
Select Where To? >
2
Select the shortcut to remove.
3
Select the shortcut again to confirm.
Entering a Truck or RV Profile
DELETE THIS TEXT. Delete taskbody tags for a title-only topic.
Finding Locations
The device offers many methods for finding locations.
• By category
(page
• Near another location
• By spelling the name
• By address
(page
• Using recently found locations
• Using coordinates
• Using the map
(page
• Using saved locations
About Locations
The detailed maps loaded in your device contain locations, such
as restaurants, hotels, and auto services. You can use
categories to browse for nearby businesses and attractions.
Finding a Location by Category
1
Select Where To?.
2
Select a category, or select Categories.
3
If necessary, select a subcategory.
4
Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
three destinations you selected.
1
Select Where To?.
2
Select a category, or select Categories.
3
Select a category.
4
If applicable, select a destination from the Quick Search list.
5
If necessary, select the appropriate destination.
Finding Trucking Points of Interest
DELETE THIS TEXT. Delete taskbody tags for a title-only topic.
> Remove Shortcut(s).
2).
(page
3).
(page
3).
3).
(page
4).
(page
3).
3).
(page
4).
Finding Locations
- Quick Links:
- Using a Backup Camera
Hide quick links:
Advertisement
Table of Contents
