Entering Ship Settings - ACR Electronics Nauticast Y1-03-0212 Installation Manual

4.3 Entering Ship Settings

Select from the Main Menu "4. Ship Settings" This option requires the USER password. The
default password from the factory is mentioned on your AIS display at the protection foil.
Please see the appendix in your User Manual for additional password information.Enter
Password and use the up and down arrows to edit Ship Settings then press Enter or the
numeric reference on the keypad to select and edit.
Save after editing.
Main Menu Example:
Select Ship Settings and press M5 [Enter]. Enter User Password and Continue.
Ship Settings Menu Example:
Select and enter ATIS Code / Call Sign.
Select and enter Ship Name.
Select and enter Length of Convoy (in m).
Select and enter Beam of Convoy (in m).
Select and enter Internal and External GPS antenna positions.
Select and enter Length of Ship (in dm).
Select and enter Beam of Ship (in dm).
Installation Manual
o o
N 1 23' E 0 16' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| Menu
-----| |
| +- 1. Messages
View | +- 2. AIS Status
| +- 3. Voyage Settings
-----| +- 4. Ship Settings
| +- 5. Transponder Configuration
Msg. | +- 6. Service Configuration
| +- 7. Display Settings
-----| +- 8. Graphical Display Settings
|
Displ|
----------------------------------------
NUM|Select->|
o o
N 1 19' E 0 12' |1>0.01|2>1.30|3>1.80nm
************ Ship Settings *************
Atis Code :max. 7ASCII
ShipName :Nauticast(tm) Inland AIS
| |
Length(Conv):400m
Beam(Conv) :32m
RefPtExt :A380 B20 C8 D24m
RefPtInt :A380 B20 C8 D24m
Length(ship):600dm
Beam(ship) :220dm
----------------------------------------
| Save |
| |<-Back
+------+
| A
| |
| x--|
| | B
| | |
+-C-+D-+
| | Back
36 Y1-03-0212 Rev. E