ACR Electronics Nauticast Y1-03-0212 Installation Manual page 38

Select Submenu 4 "Change DAC / ESN" with cursor button [Up] & [Down] by pressing Nr. 4
on the keyboard.
Input new DAC / ESN Numbers and press [Save] to store input data. Press [Back] to return to
the Submenu without saving.
Note:
The DAC (Designated Area Code) is predefined with the value "200". Please key in only a
different 3 digit value if your authority wants you to do this. Otherwise you may lose important
AIS information. The ESN (European Ship Number) is limited to 8 ASCII characters.
Installation Manual
o o
N 1 21' E 0 14' |1> N/A|2>0.00|3>0.10nm
********** Change MMSI / IMO ***********
MMSI :119302468
IMO No.:303174162
----------------------------------------
NUM| Save |
o o
N 1 21' E 0 14' |1>0.01|2>1.30|3>1.80nm
|----------------------------------
| 6. Service Configuration
-----| |
| +- 1. Change Service Password
View | +- 2. User Password Settings
| +- 3. Change MMSI / IMO
-----| +- 4. Change DAC / ESN
| +- 5. Change AIS Mode
Msg. | +- 6. Restore Factory Settings
|
-----|
|
Displ|
----------------------------------------
NUM| Select->|
| | Back
| |<-Back
34 Y1-03-0212 Rev. E