Accessories - ACR Electronics Nauticast Y1-03-0212 Installation Manual

Acr electronics automatic identification system installation manual
Table of Contents

Advertisement

6 Accessories

The following material is included with the NAUTICAST.
1 NAUTICAST Inland AIS Transponder
1 installation manual, 1 user Manual
3 caps of plug
1 cable clamp (M5 thread)
1 guide plate Kit
3 angles + 3 mounting screws (screw bolt + square nut)
The NAUTICAST Inland AIS is supplied with some of the components listed below (contents
depend on customer requirements).
PRODUCT
PRODUCT DESCRIPTION
NUMBER
AIS Cable
2610
AIS Interface Cable (Power & Data) between Transponder and Connection Box & Pilot Plug, 3
meters (9.8ft) Halogen Free, IP67
2611
AIS Interface Cable (Power & Data) between Transponder and Connection Box & Pilot Plug, 10
meters (32.8ft) Halogen Free. IP67
2614
AIS Interface Cable (Power & Data) between Transponder and ECS, 1.5 meters (4.9ft)
2617
AIS Interface Cable (Power & Data) between Transponder and PC 1.5 meters (2 sensor only)
GPS/VHF Cable
2612
GPS/VHF Interface Cable, 1meter (3.3ft) Includes 1 each Female N and TNC connectors installed
and 1 each Male N and TNC connectors for RG214 cable (specify length) Not Required with P/N
2624 VHF/GPS Combi Antenna.
2613
GPS/VHF Interface Cable, 10 meters( 32.8ft) Includes 1 each Male PL & TNC connector installed.
(Not Required with P/N 2624 VHF/GPS Combi Antenna.)
ACR VHF Antenna Solution
2628
VH-3200 VHF Stainless Steel Whip Antenna 91.4cm (36in) Includes Mounting Kit & Plug PL Male
for RG214
2621
Comrod AV 7 VHF Fiberglass Antenna 1.22m(4ft) Includes Aluminum mount (Vert or Horiz..
stanchion, or bulkhead) When used with P/N 2612, 1 P/N 2632 PL Male Connector & P/N 2630
cable (specify length) are required.
ACR GPS Antenna Solution
2622
ProCom GPS4 Quadrifilar Helix Antenna 5 Volt. When used with P/N 2612 interface, one P/N
2633 TNC Connector & P/N 2630 cable (Specify length) are required. Mount P/N 2623 is required.
2623
ProCom FLG Deck Mounting Kit Metal Horiz.. surface (for P/N 2622)
ACR VHF/GPS Combination Antenna Solution (in lieu of individual VHF and GPS antenna
solutions)
2624
Comrod AC17 Combi Antenna (combined GPS/VHF) includes Aluminum mount (Vert or Horiz..
Stanchion or bulkhead) & 1m interface cable. If longer cable required, order P/N 2630 cable
(specify length) and 2 P/N 2631 Male N connectors. P/N 2612 or 2613 are not required with this
option.
Optional VHF/GPS Antenna Cable extensions and Plugs (select or supply own cable)
2630
GPS/VHF RF Antenna Cable extension cable RG214 (No Plugs) Sold per meter
2631
N Male RG214 Crimp
2632
PL Male RG214 Crimp
2633
TNC Male RG214 Crimp
Optional AIS Cable Connection Box (Required for Advanced Installation with ECDIS, etc.)
2640
Connection Box
Optional 12vt to 24vt DC to DC Converter ( Required for 12vt power systems)
2642
12v to 24v DC to DC Power Converter.
Optional Mounting Bracket Assemblies for UAIS Nauticast™
2650
Mounting Bracket Gimbal Style (Includes 4 screws and 2 Mounting Knobs)
2651
Retro Fit Frame Drop In Mount (Includes 3 screws, nuts, clips to hold display to bracket)
2652
Frame for Rack Mount. 48.3cm (19in) Includes 3 Bolts and Nuts to hold display to bracket.
Discontinued
Installation Manual
50
Y1-03-0212 Rev. E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nauticast inland - installation rev eNauticast 2662

Table of Contents