Selecting A Channel; Programmable Top Button Options - Motorola DLR1060 User Manual

SELECTING A CHANNEL

To select a channel, press Menu button until
the voice announcement "Channel <Number>,
to change press + or -" is heard.
Press (+) or (-) buttons to select the desired
channel. An audible voice indicates the
selected channel.
To exit Channel Change, press the PTT button
or wait for Menu timer to expire.

PROGRAMMABLE TOP BUTTON OPTIONS

The Programmable Top button can be
configured to allow multiple calling options.
Upon pressing the Programmable Top button,
you will be able to transmit and receive based
on how the button has been configured. The
interaction for all options, with the exceptions of
"Disabled" comes with specific LED indications.
Programmable Top Button Options:
Private Reply – Enters the Private Call mode
with the last user that was transmitting on the
28
English
talkgroup when the Programmable Top Button
is pressed.
Private Direct Call – Enters into Private Direct
Call mode with a pre-programmed radio user
ID
Note: The radio user ID must be configured via the
CPS
Call All Available – Calls all radio users that
are available in all channels. This feature is
only available when the radio is programmed
using a PIN.
Note: Only radios that are not currently
transmitting or receiving hears the call.
Radios in private hangtime does not receive
the call.
IMPORTANT: Call All Available feature does NOT
interrupt ongoing conversations.
Disabled – When the Programmable Top
Button is not configured, pressing it returns a
bonk tone. No call is made or initiated.