REMOVE PUMP TO ACCESS GREASE FITTING WHERE SHOWN [ARROW]
Grease Fitting Type: 1/4 inch Straight
Always disconnect power to the System before lubricating ballscrew assembly
To be used with Lincoln® pistol grip 18 in grease gun [
of grease on an annual basis [This is equivalent to approximately 2 5 strokes on typical pistol/hand grip
grease guns, refer to your specific grease gun specifications to confirm]
Always use a SYNTHETIC low temperature grease that is rated for a minimum temperature of -45
CAUTION!
CAUTION!
www.mcisolutions.ca
GENERAL SAFETY
Lubrication Details
DO NOT OVER GREASE
Plunger Seal Maintenance Procedure
Please ensure you have fully read and understood the general safety section
of this manual before proceeding with any maintenance procedures
Disconnect power to the System before proceeding with any maintenance
procedures
28
] It is recommended to add 2 grams
or equivAlent
c
o