PEUGEOT 5008 Handbook page 293

08 BLUETOOTH TELEPHONE
PAIRING A TELEPHONE
FIRST CONNECTION
For reasons of safety and because they require prolonged attention
on the part of the driver, the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the Peugeot Connect
Navigation must be carried out with the vehicle stationary. The
ignition must be on.
Visit www.peugeot.co.uk for more information (compatibility, more
help, ...).
1
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (refer to the
telephone instructions).
2
Press the PHONE button.
* The services available depend on the network, the SIM card and the
compatibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services
available to you.
3
For a fi rst connection, select
"Search phone" and press the dial to
confi rm. Then select the name of the
telephone.
Enter the authentication code on the telephone.
4
The code to be entered is displayed on the screen
of the system.
Some telephones offer automatic reconnection
of the telephone every time the ignition is
switched on.
A message confi rms the pairing.
Pairing can also be started from the telephone (refer to the
telephone instructions).
Once the telephone has been connected, Peugeot Connect
Navigation can synchronise the address book and the call list.
This synchronisation may take a few minutes * .
To change the telephone connected,
press the PHONE button, then select
Phone Menu and press the dial to
confi rm.
Search phone
291